SIGLENT SDS1000D Manual de usuario descargar pdf (Pagina 18)

1.3 Probe

1.3.1 Probe Safety

A guard around the probe body provides a finger barrier for

protection from electric

shock.

Picture 1.3-1

Connect the probe to the oscilloscope and connect the ground terminal to ground before

you take any measurements.

1.3.2 Probe Attenuation Setting

Probes are available with various attenuation factors which affect the vertical scale of

the signal. The Probe Check function verifies that the Probe attenuation option matches

the attenuation of the probe.

You can push a vertical menu button (such as the CH 1 MENU button), and select the

Probe option that matches the attenuation factor of your probe.

Note： ● To avoid electric shock when using the probe, keep fingers behind the guard

on the probe body.

● To avoid electric shock while using the probe, do not touch metallic

portions of the probe head while it is connected to a voltage source.

Connect the probe to the oscilloscope and connect the ground terminal to

ground before you take any measurements.

Note

. The default setting for the Probe option is 1X.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 153 154

Sin comentarios

SIGLENT SDS1000D Manual de usuario Pagina 18