SIGLENT SDS1000D Manual de usuario descargar pdf (Pagina 76)

8. Set Skin

Press the “skin” option button or turn the “Universal” knob to select

“Classical”, “Modern”, “Traditional” or “Succinct”.

2.10.1 X-Y Format

Use the XY format to analyze phase differences, such as those represented

by Lissajous patterns. The format plots the voltage on channel 1 against the

voltage on channel 2 or plots the voltage on channel 3 against the voltage on

channel 4, where channel 1(or channel 3) is the horizontal axis and channel 2

(or channel 4)is the vertical axis. The oscilloscope uses the untriggered

Sample acquisition mode and displays data as dots.

XY mode has a breakthrough that trad oscilloscopes restrict sampling rate at

1MSa/s，

SDS1000C/D series support 5KSa/s ～ 200MSa/s (1-2.5-5 sequence)

adjusted;

SDS1000CM/CN series support 25KSa/s～100MSa/s (1-2.5-5 sequence)

adjusted ; SDS1000CE series support 5KSa/s～1GSa/s (1-2.5-5 sequence)

adjusted and SDS1000CF/CFL series support 10Ksa/s～1GSa/s (1-2.5-5

sequence) adjusted.

Operation steps ：

●

Channel 1（or Channel 3）“Volt/div”and vertical “POSITION” set up the

horizontal scale and position.

●

Channel 2 （or Channel 4）“Volt/div”and vertical “POSITION” set up

the horizontal scale and position.

Note：The oscilloscope can capture a waveform in normal YT mode

at any sampling rate. You can view the same waveform in XY mode.

To do so, stop the acquisition and change the display format to XY.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 153 154

Sin comentarios

SIGLENT SDS1000D Manual de usuario Pagina 76